Floor Model Manifold Freeze Dryers
Freezemobile Large Capacity Freeze Dryer
The Freezemobile Large Capacity Freeze Dryer is available with condenser capacities of 25 or 35 Liters. Condenser refrigeration packages of -53, -70 and -85C are available to allow configuration for a variety of solvents. A wide array of manifolds are available including stainless steel and acrylic, tree or drum manifolds, heated or unheated shelves with bulk or stoppering.
Specification |
ES
|
XL
|
EL
|
Maximum Low Condenser Temperature (°C) 60Hz or 50Hz |
-53C / -50C
|
-75C / -67C
|
-85C / -82C
|
Maximum Low Temperature for Optional Shell Bath (°C) 60Hz / 50Hz |
-45C / -42C
|
-55C / -52C
|
-70C / -67C
|
Condenser Capacity in 24 hours* FM25 / FM35 This specification is based on freeze drying water as aggessively as possible. The ability to collect ice is application dependent and your actual rate will most likely be lower |
14 L / 20L
|
||
Condenser Capacity Total FM25 / FM35 |
25 L / 35L
|
||
Condenser Surface Area FM25 / FM35 |
506 in2 /3264 cm2 / 750 in2 / 4838 cm2
|
||
Vacuum Pull Down Time to 100 mT (0.133 mB) (minutes) |
≤20 minutes
|
||
Lowest Vacuum mT / mB (Refrigerated, Dry and Empty) |
15 mT / .0198 mB
|
||
Note: Performance specifications are based on SP Industries test data from units operating at an ambient room temperature of approximately 20 °C. SP Industries recommends an operating range of 15-25 °C (59-77 °F). |
FM25
|
FM35
|
Freezemobile Shell Bath
The Freezemobile Shell Bath, a floor model shell bath available in a -75C configuration, helps to decrease manifold freeze drying time. The FSB rotates the flask on its axis thereby coating the interior surface of the flask with frozen product. This increases the surface area of the product-to-energy input, as well as vapor removal; thus helping to reduce the freeze drying process to the shortest time possible when utilizing flasks and a manifold system.
Specifications | ||
EL
|
||
Maximum Low Bath Temperature (°C) 60Hz or 50Hz |
-70C
|
|
Maximum Flask Capacity — Single chamber. For dual chamber simply double the number of flasks 40 ml 75 ml 150 ml 300 ml 600 ml 1200 ml |
4
4 4 2 2 1 |
|
Note: Performance specifications are based on SP Industries test data from units operating at an ambient room temperature of approximately 20 °C. SP Industries recommends an operating range of 15-25 °C (59-77 °F). |
Dimensional Data | ||
EL
|
||
Width (in. / cm) |
25 / 3163.5
|
|
Depth (in. / cm) |
29.0 / 73.3
|
|
Height (in. / cm) |
41.5 / 105.4
|
|
Approximate Weight (lb / kg) |
375 / 170
|
|
Minimum Clearance on All Sides (in. / cm) |
10.0 / 25.4
|
For further enquires please contact us on contact@scitek.com.au or on our contact page.